Sentence examples for specimen distortion from inspiring English sources

Carbon dioxide critical point drying was preformed to avoid specimen distortion during the drying process.

Problems of specimen distortion under the beam are mitigated by the use of a fast-readout direct-exposure detector [5], allowing images to be read out rapidly and shifted into register [6].

However, during STEM observations, the concentrated electrons in a narrow specimen could cause specimen distortion or fracture, so too thin specimens can be a problem [ 20].

Vitrification preserves the specimen in a near-native environment, eliminating not only specimen distortions due to dehydration and adsorption but also the limitation in achievable resolution associated with negative staining.

The CTF and MTF describe distortions from interactions between electrons and the specimen and distortions due to the image detector [ 31, 32].

The CTF and MTF describe distortions from interactions between electrons and the specimen and distortions due to the image detector (Frank, 2006; Nickell et al., 2005).

However, due to refractive index mismatch (e.g., between water and tissue for water immersion objectives) and inhomogeneity within the specimen, wavefront distortions limit signal and contrast in deep imaging, especially for confocal, multi-photon microscopy or full-field Optical Coherence Tomography (ff-OCT).

The EMTM simulation predicts with a very good accuracy the microwave repartition and the resulting densification and powder specimen's shape distortions observed experimentally.

Histology of the liver was almost same in all five specimens which showed distortion of liver architecture, red cell extravasation with collapse in the reticulin frame work and disintegration of hepatocyte nuclei suggestive of massive liver cell necrosis.

Regardless of the length-to-depth aspect ratio (l n /h), the HPFRCC specimens generally underwent less shear distortion than the RC specimens, even though the HPFRCC specimens had 50% less transverse reinforcement.

The cracking was mitigated using a reverse gradient at one end of the specimen, and the resulting distortions associated with the shape profile were determined to be no more than 15% reduced from the predictions.