Your English writing platform
Discover LudwigSuggestions(2)
Exact(24)
Outside specimen diameter.
A linear relationship was observed between the magnitude of the strain burst and the specimen diameter.
In our work, interfacial effect was investigated and summarized into three types of parameters, i.e., interfacial friction coefficient, specimen diameter and specimen non-parallelism.
Although other researchers have suggested correction factors derived from finite element method (FEM) models, it is proposed that side effects can be minimized by increasing the specimen diameter.
For example, an increase of 4° in ϕ'cs from the 70 mm to the 38 mm specimen diameter leads to an 80%% increase in Nγ.
In light of these concerns, attention was focused on the assessment of the impact of measurement methodology and specimen diameter on HMA air void content.
Similar(36)
Different studies employ different specimen diameters (D) and heights (H) in triaxial compression tests.
When the specimen diameters are smaller than ∼3 4 μm, AlN micropillars show metal-like plastic flow under room-temperature uniaxial compression.
Three specimen diameters (6.2, 12.9 and 27.5 mm) and four impact angles (20, 45, 67.2 and 90°) were considered, as well as a wide range of impact velocities (60 200 m/s).
Valid results were obtained in the approximate frequency range of 400 Hz to 200 kHz with specimen diameters between 11 and 21 mm, and specimen lengths between 200 and 800 mm.
An important implication of the latter result is that specimen diameters must be chosen appropriately when comparing test groups with different architectures (e.g. normal versus osteoporotic) to ensure that the magnitude of side artifacts does not confound the true differences between the groups.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com