Suggestions(2)
Exact(17)
A reference system is adopted to label each specimen as shown in Table 1.
Flexure, shear and bond failures were concentrated near the joint of the MONO specimen as shown in Fig. 14a.
The thin film metal heater line is also freestanding and is perpendicular to the specimen as shown in Figure 1.
In the stiffness versus deflection characteristics, stiffness at ultimate load was compared with each specimen as shown in Fig. 14.
The compressometer included two aluminum rings that were fixed at a distance of 225 mm from top and bottom of the column specimen as shown in Fig. 4.
Moreover, G-CSF is expressed in the resected specimen, as shown by immunohistochemistry (IHC) and/or reverse-transcriptase polymerase chain reaction.
Similar(43)
Carbonation affected the total void ratios in all the specimens as shown in Table 9.
Demec points were centered on the centerline of the specimens as shown in the Fig. 6.
A similar pore-water pressure response was observed for both the residual soil specimens as shown in Fig. 11.
The mechanical properties were measured with the tensile test using the dumbbell-shape adhesive specimens, as shown in Table 1.
The relative dynamic modulus is determined by measuring the transverse frequency of the specimens as shown in Fig. 6.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com