Your English writing platform
Discover LudwigSuggestions(1)
Exact(6)
For dynamic tensile experimentation, Brazilian disc specimen are used which are slightly flattened before testing.
In the present investigation the weight function parameters M 1, M 2 and M 3 derived by Ince (2012) for the split tension cube specimen are used.
Resulting tensile cracking patterns on the convex side of bend specimen are used to quantify the interfacial shear strength with a shear lag model.
In this section, the loads corresponding to crack initiation in the ECT specimen are used to calculate the critical strain energy release rates through the width of specimen using non-linear elastic finite element models.
It will be more accurate if the creep crack growth rate and creep fracture toughness data measured by the SENTp specimen are used in integrity assessment of axially cracked pipes.
Good quantitative agreement is obtained between the measured surface strain distributions and the numerical results if the layer shifts of the tested specimen are used in the FE model.
Similar(54)
A plate-type specimen was used for, and a disk-type specimen was used for.
A polycrystalline SiO2 specimen was used as a standard.
For carbonation test, square mold specimen and circular specimen were used.
Here, the electrospun PCL mat specimen was used as test control.
Until this point, an idealised geometrical shape of the specimen was used for all samples examined.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com