Sentence examples for specimen are calculated from inspiring English sources
Green's functions of the stress intensity factor and crack opening displacement of the CNB specimen are calculated in order to simulate the CL kinetics.
(2) From the parameters, the hazard for each specimen was calculated and the specimen's survival curve was determined.
From the recorded pressure waves, stress, strain and particle velocity in the tested specimen were calculated.
The total amount of antibiotic eluted from each specimen was calculated by summing up data from all time points.
Therefore, the number of bands from each lane was counted and average number of bands per specimen was calculated (Table 3).
At the end of 6 h, the sample was removed from the cell and the amount of coulombs passed through the specimen was calculated.
The total current required for each specimen was calculated on the basis of the total steel surface area, using corrosion current density of 2.0 mA/cm2.0
The relation between the specimen curvature and the strain energy due to the residual stress was theoretically investigated and the mode II energy release rate for each specimen was calculated using measured specimen curvature.
The relative dynamic modulus (RDM) for each specimen was calculated from the fundamental transverse frequency using the following equation supplied by Olson Instruments: {text{RDM}},=,frac{{f_{n}^{2} }}{{f_{0}^{2} }} times 100;% (1 where ( f_{0}^ ) is the fundamental transverse frequency measured at zero cycles and ( f_{n}^ ) is the fundamental transverse frequency measured at n cycles.
With exception of 1990, the 3-year sum of the modelled deposition values, preceding the time of the sampling of the moss specimen, were calculated and assigned to each EMEP cell since the analysed moss shoots represent the recent 3 years of growth.
The values of hardness changes (HC) and elastic modulus changes (EC) of each specimen were calculated according to the following formula: HC1 represents the percentage change of nanohardness between baseline and after bleaching: {mathrm{HC}}_1 = left({H}_{mathrm{bleaching}}-{H}_{mathrm{baseline}}right)/{H}_{mathrm{baseline}}.
