Sentence examples for specific cylinder from inspiring English sources
Morris et al. (1996) developed the geometry correction factor for specific cylinder sizes and the ratio of two different types of resistivity is computed as 2.63.
Nowadays swirl and tumble motion characterizing a specific cylinder head are evaluated experimentally at design stage mainly using stationary flow benches.
The results show that the axial buckling load of the specific cylinder analysed here can be reduced to 29.5 kN and increased to over 40 kN from a perfect load of 38.2 kN from material and thickness imperfections alone.
It is noted that, to take into account the size effect (Graybeal and Davis 2008; Neville 2011) in the predictions, the cube strength was converted to the cylinder strength based on the strength class conformity of Eurocode 2-04 (2004a): specific cylinder-to-cube strength ratios for strength classes up to C55/67 and a constant difference of 15 MPa for higher strength classes (Tam et al. 2017).
This is done by prescribing a specific inter-cylinder modal pattern, and this is the reason for calling this the constrained-mode solution.
Thus with selecting a proper n and structure parameter, engineers can design a specific FGM hollow cylinder that can meet some special requirements.
Aimed to minimize mass of a specific Kagome lattice cylinder in practical engineering, a multi-parameter optimization model is built in MATLAB Optimization Toolbox™ and successfully applied to optimize the four geometrical parameters of the large-scale lattice cylinder under axial compression.
The 01 indicates it's a cylinder specific problem, in that there is a misfire condition in the number 1 cylinder.
The results imply that spiral cylinder with specific vibration characteristics can be designed using equivalent open circular cylinder.
Ductile fracture criteria implemented into the commercial finite element code Abaqus through user subroutine VUMAT were applied to simulation of compression of newly designed cylinder with specific recess to show the crack prediction ability using the element deletion technique.
Finally, the design strategy for the spiral cylinders with specific vibration characteristics is presented.
