Suggestions(5)
Exact(1)
An increase in minimum inhibitory concentrations (MIC) for several antibiotics, including ciprofloxacin, was found when analyzing results over the time span of specimen collections.
Similar(59)
The strength corresponding to the limit of proportionality (LOP) can be obtained by using the following equation: f_{text{fct,L}} = frac{{3.F_{L}.l}}{{2.b.h_{sp}^{2} }}({text{Mpa}}) (1 where, l (500 mm), b (150 mm) and h sp (125 mm) are the span of the specimen, width and distance between the tip of the notch and the top of the specimen, respectively.
Span of the specimen.
In this study, the crack opening and slip behavior around critical cracks as well as the average shear strains in the entire shear span of the specimens were analyzed.
Steam curing improves the maximum mid-span deflection of specimens about 50% relative to the standard cured samples.
In the flexural test, the load was applied at the mid-span of each specimen with a supported length of 228.6 mm.
Bending stress was determined from the formula F∗ L∗ c/4 I where F is the applied load, as described above, and corresponding to a load in the linear elastic range; L is the span of the loaded specimen, c is the cortical radius, and I is the moment of inertia, as determined with micro-CT [ 7].
The life span of the Activmotion specimens prior to failure was, on average, 1.7 higher than that of the TomoFix standard group.
Also, the recommended values of various specifications become increasingly conservative as the shear-span to depth ratio of specimen declines.
The key variables included concrete type, maximum size of coarse aggregate, coarse aggregate content, and shear span-to-depth ratio of specimen (Lachemi et al. 2005).
The crack patterns of the observed span of the three beam specimens are shown in Fig. 5, in which the numerical values are the corresponding external torques, and the bordered ones are first flexural cracking torques (the smaller one) or first diagonal cracking torques (the larger one).
More suggestions(2)
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com