Your English writing platform
Discover LudwigSuggestions(1)
Exact(6)
Especially with 3.0 M methanol solution, the maximum power density is increased by ∼60%.
For dyes 1, 5 and mixed azo dye solution, the maximum % CR was obtained within 120 min, while for dye 4 and 6, it took 240 min.
Based on the high etching selectivity of Si(100)/SinN4 in KOH solution, the maximum fabrication depth can reach several microns.
With the mass ratio of 1/10 (w/w) between the flocculant and dye, and at pH 4 and 20 °C of the initial dye solution, the maximum color removal reached.
If the AgNO3 is added dropwise to the aqueous PEG solution, the maximum of the absorption band is significantly shifted to 433 nm while the resonance becomes broad (Figure 1 curve B).
Meanwhile, using non-activated carbon-based catalyst in the aqueous solution, the maximum furfural yield of 50% was obtained from hemicelluloses at 200 °C for 2.5 h, the maximum xylose yield of 55% was achieved at 200 °C for 1.5 h.
Similar(54)
Each curve represents, for different solutions, the maximum value reached during one period of the solution at different parameter values.
Therefore, using the good initial solutions the maximum number of iterations of the inner loop (il max) is also reduced.
In 49 valid responses, 27 with and 22 without solutions, the maximum mark awarded by any assessor was 49 and the maximum awarded by the tutor was 50.
It can be concluded that in the presence of 6 and 8 molar alkaline solutions the maximum strength could be reached with 5%and10%0% replacement respectively.
For these solutions, the maximum oxidation currents increase steadily with increasing pH up to pH ≈ 5, followed by a plateau until pH 10.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com