Sentence examples for solution specimens from inspiring English sources

After 3×5-minute washes with blocking solution, specimens were incubated with secondary antibody (Alexa Fluor 488; Invitrogen Carlsbad, CA) for 2 hours at RT. Nuclei were visualized by addition of Hoechst (10 μg/ml, Invitrogen) for 5 minutes after secondary antibody solution.

After being labeled overnight at 4°C with anti-serotonin (diluted 1 10,000 in the above blocking solution), specimens were washed in PBS and reacted for 1 hour (cryostat sections) or 3 hours (whole-mounts) with Cy3-conjugated goat anti-rabbit-IgG.

Open image in new window Fig. 2 Hydrogen thermal desorption curves for the non-immersed specimen, specimen immersed in 0.2 % APF solution, and specimens aged for 24 and 240 h at room temperature in air after immersion.

Open image in new window Fig. 3 Typical stress-strain curves for the a non-immersed specimen, b specimen immersed in 0.2 % APF solution, and specimens aged for c 24 h and d 240 h at room temperature in air after immersion Open image in new window Fig. 4 Tensile strength for specimens immersed in 0.2 % APF solution and cathodically hydrogen-charged specimens as a function of aging time.

Open image in new window Fig. 7 XRD patterns for the a non-immersed specimen, b specimen immersed in 0.2 % APF solution, and specimens aged for c 24 h and d 240 h at room temperature in air after immersion Open image in new window Fig. 8 XRD patterns for the a specimen immersed in 0.2 % APF solution and b the cathodically hydrogen-charged specimen after aging for 50 h at room temperature in air.

The effect of the two step practice on the final recrystallized fraction was determined by examining hot rolled and solution treated specimens.

On the other hand, shear stress amplitude increased monotonically with increase in shear strain amplitude on solution treated specimens.

Moreover, X-ray diffraction analysis indicated that isothermal aging of solution treated specimens at 850 °C for 24 h did not lead to complete fcc phase transformation to hcp one.

Besides, due to the presence of moisture in the pore solution of specimens maintained in the combined condition, less CO2 gas and chloride ion ingresses were observed.

When hydrogen-charged in an H 2S-saturated solution, all specimens suffered a small drop in tensile strength as compared to those tested in air; however, the loss in ductility was more significant.

Thus, to increase the concentration in the solution, the specimens should be stored in small sample volumes.