Sentence examples for solid specimen from inspiring English sources
First, a solid specimen as well as 3D orthogonal and 3D braided preforms have been fabricated using fused filament fabrication (FFF) and inspected with X-ray μ-CT.
Recently, a stereolithography technique was used to produce a textile-like solid specimen with anisotropic permeability, designed as a reference for calibration and comparison of permeability measurement set-ups and for validation of numerical permeability computation software.
It showed that boring the solid specimen in order to produce a TWHC specimen could generate microcracks on the borehole wall prior to testing which affects the process of borehole failure development during the test.
Based on the observations during the tests, drift levels at the different limit states have been evaluated, with the attainment of large values for the solid specimen (0.30%, 0.50% and 1.75% at the operation, damage limitation and ultimate limit state, respectively), but lower performance for the panel with opening.
In this contribution, we will examine the dose-rate dependency of the achievable TEM resolution of a solid specimen immersed in a gas environment in further detail.
After hydrothermal crystallization at 453 K for 24 h, the ZnAlPO4 solid specimen was recovered by filtration, washed with deionized water until neutrality, and dried.
Axial fatigue life in tubular specimens were lower than that in solid specimens.
Eight specimens in two groups (four solid specimens and four hollow specimens) were cast and tested under axial compression.
It is shown that the DIF measured by SHPB tests on tubular specimens is lower than the DIF measured by SHPB tests on solid specimens.
We present exemplary spectra obtained in situ of gas, liquid, and solid specimens, and of the ubiquitous signal of sea water itself.
We report measurements of molecular orientation in solid specimens of a main-chain thermotropic liquid crystalline polymer (LCP) that were quenched from mixed shear-extensional channel flows.
