A solid probe is only used for calibration.
Photoluminescence (PL) studies were carried on a fluorescence spectrophotometer, LS55, PerkinElmer and a front probe surface accessory LS55 model solid probe.
For cell lysis, cells were thawed, resuspended in the adequate buffer and lysed by ultrasonic disruption (sonication) using a Vibra cell™ 75043 (Bioblock Scientific, 750 W max power) with a solid probe of 25 mm diameter.
In this work, the coupled calcite-brine-oil system was studied by measuring the adhesion force of an organic acid functionalized solid probe with a calcite surface, using an atomic force microscope.
The mixture was sonicated using a High Intensity Ultrasonic Processor (Vibra Cell) with a standard 13mm horn solid probe for 150 seconds.
This gave a typical reading through a fluid-filled system and a simultaneous measurement through a solid transducer at the tip aDescription of calibration (of the solid probe) and zeroing (of the ventricular fluid-filled catheter).
They reported 15 studies, 10 in Group 1, and 5 in Group 2. The main features of the studies are reported in Table 1, including details on calibration of solid probes before insertion, and zeroing of ventricular fluid-filled catheters.
27Al MAS NMR spectra were collected on a Bruker Avance 400 wide-bore spectrometer (9.4 T) operating νo = 104.25 MHz using a 4 mm triple-resonance solids probe.
Instead of a solid silicon probe, SICM squirts a stream of saline solution through a thin capillary tube.
The 51V magic angle spinning nuclear magnetic resonance (MAS NMR) spectra were recorded at 600 MHz on a Bruker Avance III 600 NMR Spectrometer fitted with a Bruker Solid State Probe.
