Sentence examples for solid mild from inspiring English sources

A single unit dynamometer system, with two extended octagonal rings was designed and fabricated using a solid mild steel block, was able to measure force up to 5 kN in each direction.

If optimization criteria were based on maximization of hemicellulosic sugars recovery in the hydrolysate along with cellulose preservation in the pretreated solids, milder pretreatment conditions of 144 °C, 6 min and 2% free acid concentration should be used.

When large and bulky, tumours are typically heterogeneous and mainly solid, with mild or marked enhancement after the intravenous administration of contrast media (Fig. 12).

Concrete segments are modeled using solid elements, mild steel reinforcement is modeled by beam elements embedded into the concrete segments, and the unbonded tendons are modeled using truss elements.

The data in the literature on the mechanical properties of commercially available solid section mild carbon steel used in structural fire engineering is scarce and limited to investigations at ambient temperature, showing high inhomogeneity in the yield strength between peripheral and core material, especially in the as hot-rolled condition.

Tetrapeptide 6e was however prepared in good yield via two pathways: (B) using the 2-chlorotrityl resin as solid support (milder acidic conditions are required for peptide cleavage), followed by double bound hydrogenation and subsequent removal of the Boc protecting group and (C) performing the CMR reaction on the Boc-Tyr(All -OMe All -OMenyl reduction before the peptide couplings.

The inks inside the channels are then dried into solid forms at mild temperature (<100°C).

In contrast to the adsorbed aliphatic hydrocarbons extracted from the solid bitumens, the mild oxidative products showed unaltered n-alkanes distributions, which had been trapped within the macromolecular structure of the bitumens and protected from biodegradation processes.

It implies that a direct synthesis of CNTs by a transformation of solid carbons under mild conditions is possible; if accessible, then it would be quite beneficial for a large-scale synthesis due to the intrinsic high-feeding density characteristic of the solid-phase reaction process.

The DDI method takes advantage of specific hybridization of complementary oligonucleotides and thereby allows the site-specific capture of sensitive biomolecules by the DNA microstructures on a solid substrate under mild conditions.

The porous membranes induced a robust infiltration by multinucleated giant cells and some mast cells, whereas the solid membranes elicited mild fibrous capsule formation and a discrete inflammatory reaction.