Sentence examples for solar coating from inspiring English sources

They are developing technology that will allow the solar coating to be sprayed on, instead of the current method.

Starting from the typical cermet-based thin film stratification constituting high-performance solar coating, the optical properties of the metallic layer deposited as "back reflector" strongly determines the thermal loss amount, where solar coating emissivity should have to be as low as possible.

Improvement of structural and morphological stability of Ag layers has to be pursued for effective employment in solar coating technology for "parabolic trough" thermal plants.

The optimised calculated AlON/W AlON/Al solar coating film with two cermet layers has a high solar absorptance of 0.953 and a low hemispherical emittance of 0.051 at 80°C for a concentration factor of 2. The AlN/W AlN/Al solar selective coatings with two cermet layers were deposited using two metal target direct current magnetron sputtering technology.

By adopting a total cost counting approach a sputtered solar absorber coating is compared with an electrochemically produced solar absorber coating for the application of domestic hot water production.

A cerium-iron oxide solar control coating on glass was prepared by citric acid sol-gel method, dip-coating techniques and proper heat treatment process.

A new solar selective coating was designed in our paper.

Glazings with solar control coating are therefore obvious alternatives to dynamic solar shadings.

The absorptance and emittance of the optimized solar selective coating were 0.945 and 0.04 °C2 °C), respectively.

The absorptance and low emittance of the optimized solar selective coating were 0.945 and 0.04 °C2 °C), respectively.

On this basis, we initially developed a solar selective coating for parabolic troughs.