Sentence examples for soft ceramic from inspiring English sources
As a consequence of their reduction of eddy currents, soft ceramic ferrites are employed in telecommunications and transformers, especially at higher frequencies.
Plasma nitriding treatment was used to improve the surface hardness of a Ti2AlC soft ceramic due to its relatively low hardness of ~ 3 GPa.
Alaneme et al. (2013) reported that the fracture toughness of SiC- and BLA-reinforced hybrid Al-Mg-Si alloy composites improved with the increase in BLA content, which may be attributed to the increased presence of silica which is a softer ceramic in comparison with SiC.
A novel experimental method is used to measure the evolution of the linear elastic, dielectric and piezoelectric moduli of a soft ferroelectric ceramic during loading.
The present study explores the impact of large signal mechanical and electrical loading on the low frequency linear response of a soft PZT ceramic.
Regions of crack bridging are identified and quantified from the crack face topography of a crack in the soft PZT ceramic PIC151, which was measured by optical 3-D microscopy after total failure of the specimen.
Fernando Martínez Sanabria and Guillermo Avendaño, both also from Colombia, moulded modest houses with steeply sloped roofs and soft curves, like ceramic vessels tucked into the side of a hill.Early experiments undertaken in Cuba after the 1959 revolution were unsocialistically suave.
In the experimental work, the electric mechanical response of a soft PZT ferroelectric ceramic subjected to combined electric mechanical loads was observed.
The longitudinal strain and polarization of a soft polycrystalline ferroelectric ceramic (lead zirconate titanate, PZT) were measured under uniaxial compressive stress at elevated temperatures utilizing a novel testing fixture.
As the green ceramic is soft, it will lap to dimensions in a short time.
Tumours, non-developer skin corresponding to the abraded site or untreated skin were harvested and placed in 0.5-ml polypropylene tubes containing 1.4-mm ceramic beads (soft tissue homogenizing mix, Omni) and DNA lysis buffer (50 mM Tris, 50 mM EDTA, 1% SDS in MilliQ H2O, pH8).
