Sentence examples for socket drilling from inspiring English sources

The femoral epicondyle is palpated and identified, preferentially before ACL femoral socket drilling.

The purpose of this study was to evaluate the accuracy of a 3.5-mm-diameter anterior cruciate ligament (ACL) tibial retrograde socket drilling pin versus a standard, 2.4-mm drill-tipped guide pin.

The upper end of the shaft required a pad or socket (drill pad) in which it could rotate freely.

Locate the rivet hole in the shovel socket and drill a pilot hole into the handle.

Fit the pin (1/2 smooth rod) you just welded onto the angle into the socket you drilled earlier, then line the other notch up with the socket on the opposite end so you can fit the other pin into place, then weld that pin to the angle iron.

While in the "non-wobble technique" group, the graft socket was first drilled using a 7 mm drill bit over the guide pin.

Put the socket on the drill.

Multiple 2-mm drill holes were then made around the rim of the socket using the stepped drill, taking care not to perforate the inner table of bone.

You might be done in about 1 hour if you are diligent, have all the tools ready and use a power drill and socket wrench).

In contrast, in the "non-wobble" technique group, the smaller cortical button drill was passed after drilling the graft socket.

The "wobble" technique group had the smaller cortical button drill passed before drilling the graft socket with the bigger diameter femoral drill.