Sentence examples for small wall thickness from inspiring English sources

With the small wall thickness of 3 mm of the tubes, the adhesive leaks out till the carrying-fleece of the film adhesive is fully compressed.

Purlins made of cold-formed steel (CFS) sections are normally susceptible to failure caused by buckling due to their small wall thickness.

Since the foam has large contacting surface with gas and very small wall thickness, it is appropriate to assume that the foam and gas are at the same temperature T all the time [15].

Even at high overall heat transfer conditions (possible due to small wall thickness) the scaling quantity was found to be very low compared to a stainless steel surface and strongly dependent on the interfacial energy difference between polymer surface and deposit.

Based on the results, the RE wall under moderate loading conditions require smaller wall thickness than recommended wall thickness by various guidelines such as New Mexico-USA, Mexico-USA, New Zealand and Zimbabwe Codes

The prepared carbon membranes presented a symmetric structure and a much smaller wall thickness of 25 μm compared to the precursor (40 μm) from the SEM images.

Therefore, the PMMA/PAN nanofibers obtained from the outward coaxial nozzle system reveal much smaller wall thickness than the other systems and thus can improve their specific surface area.

From the table, the PMMA/PAN nanofibers produced from outward coaxial nozzle reveal the largest nanofiber diameter and smallest wall thickness compared to normal and inward coaxial nozzle systems.

In addition, antibody-modified grafts maintained a smaller wall thickness compared to VEGF-modified and unmodified grafts.

General theoretical considerations predict that, in the case of positive filament tension, which we have for a = 0.03, the filament tends to approach the region with the smallest wall thickness [ 14].

–low pressure, implying low wall thickness.