Sentence examples for slurry surface from inspiring English sources

The mechanism of vacuum-induced surface directional freezing is suggested to be undercooling of the slurry surface to below −10 °C at reduced pressure by evaporative water loss.

Mr. Landers's recreations have a wonderful gaucherie, but the real revelations here — as paintings and as human drama — are eight smaller, ancillary works that feature British Redcoats, in which nature, women and death enter the picture and are expressed on a wonderful, shimmering, slurry surface.

In the rod-insertion method, a steel rod was inserted vertically and freely from the slurry surface, and the first traveling length through the slurry was recorded.

Experiment was conducted on the fabricated biodigester of capacity 30 l. Slurry of cow manure in water was fed through the inlet until the digester is about 80% filled with slurry, and the slurry surface on both inlet and outlet did not leave holes by which the air can get into the digester.

In them, nature, women and death enter the picture, along with some wonderfully shimmering, slurry surfaces.

Successive applications of pig slurry decreased surface runoff.

The reactive intermediate proposed for both slurry and surface chemistry is a metal pinacolate.

Cattle farmyard manure, broiler litter, layer manure, and cattle slurry by surface broadcast and trailing hose application were applied to one experiment in October 2012 (autumn applications) and one in April 2013 springg applications).

The composites were mixed with an optimum volume of neutral phosphate buffer maintaining a solid/liquid ratio of 1.08 g/ml and thoroughly mixed and filled in a syringe to fill up at the site of injury or casted by filling up in metallic moulds to produce pellet-shaped samples or coated as slurry on surface of cover slips.

Pyrite water slurries show surface area dependent generation of hydrogen peroxide only in the presence of EDTA, which chelates dissolved Fe(II).

The composite was produced by Polymer Impregnation Pyrolysis (PIP), which is a simple and low cost method; the coating was applied by painting a slurry on the surface of the composite and by heat treating.