Sentence examples for slurry solids from inspiring English sources

The in-mill load volume and slurry solids concentration have significant influence on the ball mill product size and energy expenditure.

With compromise optimized values of 29% ball load volume and 75% slurry solids, the response surface models yielded specific energy consumption of 10.54 kW h/t and size reduction index of 3.93.

A rising bed classifier has been designed, and a series of experiments were carried out by varying the slurry solids concentration and flow velocity to replicate the gravity induced stirred mill classification effect.

The cut size (d50C) coarsened from 158 μm to 2040 μm and sharpness of the cut increased from 0.18 to 0.84 with a rise in slurry solids concentration (v/v) from 26%to46%6% and flow velocity from 10 mm/s to 21 mm/s.

The insoluble inorganic P took about 68% of the total P in the slurry, so it is essential to perform solid liquid separation prior to aeration to enhance the efficiency of soluble P removal because insoluble inorganic P is mainly contained in the slurry solids.

However, strong sorption to slurry solids was probably the primary mechanism of tylosin disappearance.

The effects of particle size and slurry solid mass content (concentration) on head, efficiency, and power consumption of a centrifugal slurry pumps were studied.

While the slurry was pumped, longitudinal friction loss was measured and analysed as a function of particle type and properties, slurry solid concentration, slurry flow rate, and measured carrier fluid viscosity.

The cake formed from slurry with a higher initial solid fraction tends to have a lower average solid fraction and a lower average specific resistance than is the case for lower initial slurry solid fractions.

A 50 mm diameter, 25 m long pipeline facility was used to measure the longitudinal pressure gradient of wheat straw and corn stover slurries over a range of particle dimensions, slurry solid mass fractions, and slurry velocities.

In a clear contrast to the general performance of centrifugal slurry pumps in conventional solid liquid systems, the total head height increased with an increase in slurry solid mass content due to several reasons including unique friction loss behavior (i.e., drag reducing feature) of fibrous particles slurries in pipelines.