Sentence examples for slump values for from inspiring English sources
The slump values for fresh CPB and the UCS for the hardened CPB specimens were determined at different curing times.
The mean absolute percentage error was found to be less then 1,956,208% for compressive strength and 5,782,223% for slump values and R2 values to be about 99.93% for compressive strength and 99.34% for slump values for the test set.
Figure 2a shows the effect of different SCMs on the slump values for all mixtures.
The slump values for the control mix, quartzite and granite concretes were 86, 88 and 85 mm, respectively.
No wide variations in the slump values for the mixtures containing increased amounts of MK were observed.
Open image in new window Fig. 4 Slump values for POR open circle, POR/BBT filled diamond, POR/BBTAPSfilled square, and POR/BBTAEAPSfilled circle in different mixes.
As listed in Table 5, the slump values of for Group I and Group II were 135 210 and 180 to 215 mm, respectively.
The NN model, which performs in Matlab, predicts the compressive strength and slump values of HSC.
Table 2 shows a target slump value of 3 inches for both Class II (Bridge Deck) and Class IV concrete with a ±1.5 inch tolerance (Specs 346-6.4).
The slump values were obtained for all three mixtures according to the ASTM C-143 (2015).
The following conclusions were drawn from the obtained results: The type of aggregate used in this study had no considerable effect on the workability of the concrete mix as very similar slump values were achieved for limestone, quartzite and granite.
