Sentence examples for slow injection from inspiring English sources

NBCA glue can be mixed with lipiodol (usually 1 2) and after super selective nidus catheterisation slow injection follows.

A slow injection speed (2 μl/min) is recommended in static mode measurements to minimise hydrodynamic bending of the sensors.

The problems concerning the treatment of the impedance data obtained for slow injection processes are also discussed.

During CED, a catheter is directly placed into tumor via stereotactic methods, followed by a slow injection of anti-cancer agents under a positive pressure gradient.

In case of reflux, Onyx injection was stopped, and after 60 s, another slow injection was started under a new subtracted road map fluoroscopy.

The same reactor was used as in the core nanocrystal synthesis, while a syringe pump replaced the peristaltic pump for the slow injection of the shell precursors.

A slower injection might promote improved results with longer acquisition durations.

The slower injection rate and longer recombination times of photoinduced charge carriers demonstrate the effect of passivation.

NOx conversion exceeding 90% was achieved for a feed having a cycle-averaged stoichiometric number (lean to rich ratio) of 6; slower injection required a stoichiometric ratio of 4 to achieve the same NOx conversion.

The image quality of the arterial phase after gadoxetic acid injection has been shown to improve, with a slower injection rate of 1 ml/s compared with the standard 2 3 ml/s for non-specific extracellular gadolinium chelates.

Harvested porcine colonic segments were used with injection by a large gauge needle (16 G or 1.7 mm diameter × 50 mm, B. Braun Melsungen AG) to facilitate rapid injection of high concentration magnetic glue, although a smaller gauge needle (19G needle from BD Microlance 3, BD Drogheda, Ireland) can also be used for slower injection.