Sentence examples for slope sensor from inspiring English sources

This paper addresses this second approach for systems with the Shack-Hartmann (SH) slope sensor as the wavefront sensor.

First, there is a group of a nonlinear response (OECF) sensors, such as Logarithmic response sensor, Multiple-slope sensor which approaches a logarithmic response by a piece-wise linear curve having usually 3 segments, and a Linlog sensor that behaves linearly for low light intensity and logarithmically for higher intensities.

The present means of physical landslide early warning systems make use of moisture sensors or slope deformations sensors.

The slope of sensor response is found to be non linear, can have either sign and can change sign at around refractive index of the fiber.

The coefficient of variation of sensitivity (as measured by slope) between sensors was 8.5%, 8.6%, and 8.9% for each sensor lot.

They had to ski down the slope using sensors that detected where the gates were so they knew when to turn.

The slope of the sensor is about 34%/mM in the typical clinically significant range of 0.32 2.2 mM.

Finally, the influence of internal temperature profile slope on the sensor response is evidenced by the results of an experimental study.

Rock mass classes were identified through geomechanical parameters that were derived from engineering-geological surveys and outputs of a multi-sensor slope monitoring system.

In case of a nonlinear pixel response (e.g., logarithmic, multiple-slope or linlog sensor), ratios between the color pixels are nonlinearly changed and mutual relation between different colors is distorted.

Due to the inclined line-of-sight direction of SAR images (usually about 30° from the vertical), systematic geometric distortions and radiometric variations are evident in scenes with topographic relief: while slopes facing towards the sensor appear bright and compressed, slopes inclined away from the satellite are darker and stretched.