Sentence examples for slip thickness from inspiring English sources

The wall thickness was 2.5 mm and the bottom had standard cover slip thickness, 0.17 mm.

The flat bottom- and top surfaces together with the cover slip thickness (175 µm) of the glass bottom (Fig. 2B) made the chip well suited for imaging.

The correction collar is then used to adjust for the cover slip thickness and thus to obtain a reproducible, artifact free Gaussian focal volume.

HeLa cells (400 µl at 5 × 10 cells/ml) were plated onto 22 × 50 mm glass cover slips (thickness 1.5).

In spite of the variation of the slip layer thickness, it is generally accepted as roughly 2 mm thick (Jo et al. 2012; Choi 2013).

The slip layer thickness also decreases with a higher amount of fine sand.

The difference between ( R_{P} ) and ( R_{L} ) is the slip layer thickness.

Results of a sensitivity analysis of slip zone thickness (w) along the megasplay.

Note that the model using the aforementioned three tribometers does not consider the slip layer thickness for the calculation.

The slip layer thickness is proportional to the volume of the cement paste, the water-to-cement ratio, and the dosage of superplasticizer.

Therefore, pumping can be predicted by calculating the parameter ( b = mu_{i} /e ) based on the pressure-flow rate relationship without the need of the precise slip layer thickness.