Sentence examples for slight efficiency from inspiring English sources

The slight efficiency difference is attributed to diffusive limitations on contaminant removal from low-permeability zones.

The pixel sensor of the old design irradiated by γ-rays at 2.4 MGy is confirmed to exhibit only a slight efficiency loss at the boundary.

Moreover, it is found that the device not only suffers slight efficiency roll-off but also exhibits a stable color during a large range of brightness, indicating that the device can satisfy the future commercial requirements.

We observed only a slight efficiency variation (less than 3%relative) for wafer bulk lifetimes ranging from 1.2-6.5 1.2-6.5base resistivities froms2-9 Ωcm, with no significand difference baseeen the n-PEresistivities concept.

Furthermore, by introducing a TCTA interlayer, the PhOLEDs showed only a slight efficiency roll off of 5.4% from a low current density (1.81 mA/cm2) to a high current density (44.59 mA/cm2).

Even though they are slight less efficiency than Pearson correlation under normal distribution, both Spearman and Kendall correlation coefficients provide a good compromise between robustness and efficiency [ 36].

However even slight PCR amplification efficiency inaccuracy, which is practically more than often confronted due to the fact that amplification efficiencies are estimates by all current method, may distort the results significantly because of exponential nature expressed Equ.6 [ 24].

The same ideas are used to steer automatically large tankers transporting crude oil, for which even slight gains in efficiency result in large financial savings.

Even slight gains in efficiency quickly pay off as a rule of thumb, a 1% improvement knocks more than $1m off a airliner's fuel bill over its lifetime of roughly 20 years, says Ihssane Mounir, Boeing's vice-president of sales for China.

Even at a minimal cost, the only value is a slight increase in efficiency pushing customers through POS.

Considering the cost and toxicity of these two catalysts, and also due to a slight difference in efficiency between them (entries 21 and 23), we choose boric acid as optimal catalyst.