Sentence examples for size of the fiber from inspiring English sources

Along with the pyridine content, the polymer concentration was also varied to determine how the two interacted in influencing the size of the fiber and the quality of the structure obtained.

The size of the fiber sensor is ∅12 × 55 mm, the normal phase sensitivity achieves −308 dB re 1 μPa−1, the 3 dB effective bandwidth of the frequency response is 30 kHz, and the responsivity decreases less than 0.5 dB when static pressure is 2 MPa (200 m water depth).

Smooth surface and almost uniform size of the fiber was observed in Fig. 3.

This result indicates that the grain size of the fiber composites increased with increasing temperature and that ammonia promotes this process.

The core size of the fiber output of the laser diode is 9 μm, which is much larger than each nanoparticle (~30 nm), and hence, the measured optical characteristics would be contributed by the abundant AuNPs.

If the fiber size is smaller, then some coupling optics can be used to match the size of the fiber to the source.

The size of the fiber-based sensor probe is about 5 mm, which is very suitable for the internal surface measurement of small precision products.

Minor differences were observed in terms of chord sizes, clustered properties and interparticle arrival times linked with the slightly smaller sensor size of the fiber-optical probe.

Filtration efficiency of the nanofiber mats was strongly related to the size of the fibers and its surface chitosan content.

Specific surface area, total pore volume and average pore size of the fibers are measured to be 449.7 m2/g, 0.232 cm3/g and 1.7 nm, respectively.

In contrast to the composite with perfect bonding, the effective property formulations show the dependence on the size of the fibers.