Sentence examples for size of reinforcement from inspiring English sources

Analysis of stiffened composite plates with reinforced cutout is carried out to determine the type and size of reinforcement required for restoring the lost strength and stiffness.

The particle size of reinforcement had an adverse effect on hardness (Deshmanya and Purohit 2012).

Experimental resistivity of composites followed the trend of theoretical prediction, increasing with increasing volume fraction and decreasing size of reinforcement.

The optimal size of reinforcement length of steel plate is about 80 cm by comparing the different reinforcement lengths of steel plates in the same explosion case.

For a given volume fraction of inclusions, the compaction pressure to achieve a given relative density increases with diminishing size of reinforcement.

The comparison reveals that the size of reinforcement particulates is one of the influencing factors for their uniform distribution in MMC, and the distribution becomes more uniform as the particle size reduces.

The particle size of reinforcements affected the hardness adversely.

The sizes of reinforcement particles in the FSPed composite coating were substantially refined from 12.2 μm to 4.4 μm due to the severe stir effect of the tool at a rotating speed of 1400 rpm.

In order to accomplish these objectives, mechanical properties and thermal activation parameters in NiAl matrix composites with different types, shapes and sizes of reinforcements have been systematically evaluated.

No correlation between the size of glass reinforcement and wear rate was established.

The size of SiCp reinforcement phase was nearly uniform, and very few of the particles were irregularly shaped and these were dispersed randomly throughout the matrix.