Sentence examples for sinking depth from inspiring English sources

Sinking depth was strongly associated with length-height ratio, shooting duration and purse line length.

A purse seine set is considered to have a better sinking performance if its purse line reaches a greater depth in a shorter time period, i.e., higher sinking speed and greater sinking depth.

The results in this study showed that the sinking performance of a purse seine with a lower length-height ratio was better than a seine with a higher ratio, current speed at 120 m depth was the most important environmental factor affecting sinking depth of the purse seine.

The mechanisms of the sinking of a scour protection adjacent to a monopile are described in this paper, together with the determination of the equilibrium sinking depth in various wave and combined wave and current conditions based on physical model tests.

A generalized additive model (GAM) was used to analyze sinking depth and sinking speed under different sea conditions (current speed and direction at different layers), gear design (length-height ratio, towing line length and purse line length), and operational methods (shooting duration and setting speed).

The results show that, after the reconstruction of controls parameters, the ability of anti-disturbance of the controls system have been enhanced and the motor speeds and sinking depths of the sinking-hoists have a great synchronous effect, greatly improved the predictability of the system.

Drilling procedures were performed with light hand pressure and sink depth controlled with a depth gauge.

The cone would gradually penetrate into the asphalt mortar until it was stable without further sinking, and then, the sink depth was measured and recorded.

It was found that cellulose and carbon fibers had the same fiber length, but resulted in completely different softening points and cone penetrations (cone sink depth).

It can be seen that all the fiber-modified asphalt mortars exhibited a significant decrease in cone sink depth and increase in shear stress.

The mineral fiber had the greatest effect on reducing the cone sink depth and improving the shear stress among these three fibers, due to its great networking structure.