Sentence examples for simulator light from inspiring English sources
For photovoltaic device characterization, current voltage characteristics were acquired under solar simulated conditions (intensity equivalent to 100 mW/cm, AM 1.5G) using a solar simulator light source (ABET Technologies 10500, specification ABB).
Metal halide bulbs and ballasts are far less costly per-watt than typical xenon arc lamp solar simulator light sources.
A reference Si photodiode (Bunkou keiki co. ltd., Japan) was used to calibrate the power of the solar simulator light.
An AM 1.5 solar simulator (white light from a 150-W Xenon lamp, McScience, Suwon-si, South Korea) was used as the light source.
A solar light simulator (Newport 96000 Solar Simulator with an AM 1.5 filter) was used to simulate solar irradiation.
Under the illumination of solar simulator with the light intensity of 100 mW/cm2, our measurements reveal that the photocurrent increases with increasing doping level and reaches the maximum value of 1.01 matcm2 at −0.4 V versus Ag/AgCl, which corresponds to up to about 50% enhancement compared with the pristine TiO2 NRs.
This paper describes fabrication and characterization of a solar simulator which utilizes light emitting diode (LED) as a lighting source.
The simulated solar light was produced by a solar simulator equipped with a 150-W Xe lamp.
Photocurrent-voltage (J-V) characteristics were performed using a Keithley 2400 SourceMeter (Keithley Instruments Inc., Cleveland, OH, USA) under simulated AM 1.5G illumination (100 mW/cm2) provided by a solar light simulator (94043A, Newport Corp., Irvine, CA, USA).
The DSSC devices were illuminated by a grade A quality solar simulator with a light intensity of 100 mWcm−2 (AM 1.5) to measure the photocurrent voltage curves, and the solar light was calibrated with a standard silicon cell (calibrated at NREL, PVM-81). Figure 1a, b shows the FESEM images of the Pt film and pulse-ECD PtNCs, respectively.
The potentials were converted to the reversible hydrogen electrode (RHE) by using the following Equation: A solar-light simulator (Newport Oriel, 150 W) was used as a light source.
