Sentence examples for simulate the specimens from inspiring English sources

To simulate the specimens, three dimensional (3D) modeling and non-linear static analysis methods using ABAQUS software were applied.

The responses on a separate fatigue load at 20 °C and −25 °C were tested to simulate the specimens with "thawed" or "frozen" pore water respectively.

To simulate the specimens, the ANSYS software in full three dimensional (3D) modelling case and non-linear analysis method was utilized.

The model is utilized to simulate the collected specimens together with a coupled wall system and proves to be a powerful tool for the nonlinear seismic analysis of diagonally RC coupling beams and coupled walls with satisfied accuracy, efficiency and modeling convenience.

Explicit finite element analyses are used to simulate the glass specimen impact event.

Finite element analyses using different parameters for concrete tensile behavior and dilation ratios are conducted to simulate the tests of Specimens B-2 and B-4.

Tensile testing of the specimens from each category is carried out and finite element method (FEM) models are used to simulate the mechanical behavior of the specimens during the test.

The behavior of built-up T-stubs subjected to cyclic loading through the stem is studied through an experimental program and numerical analyses: twenty one-half scale T-stub specimens were tested under cyclic loading and a 3D finite model previously developed was adapted to simulate the cyclic response of the specimens under loading conditions similar to the experimental conditions.

Another notable feature is the zoo's African animal exhibit, composed of outdoor enclosures that simulate the natural habitat of the specimens displayed (e.g., the East African Rift Valley and plains).

Finite element analysis (FEA) with a modified form of Kachanov Rabotnov damage law was carried out to simulate the damage evolution in the specimens.

To simulate the structural responses of the specimens with severe geometric and material nonlinearity, a component-based joint model was proposed and incorporated into macromodel-based finite element analysis in which beams were modeled with fiber elements.