Sentence examples for silicon pieces from inspiring English sources

Although silicon pieces could be put into serial mass production, they are still relatively fragile and prone to breaking.

Silicon pieces were fixed on a sample holder where a sacrificial silicon wafer ensured a low-impurity environment.

This study assessed the degree of relationship between masticatory laterality and lateral asymmetry of masticatory performance using silicon pieces enclosed in a latex bag.

Silicon pieces (15 × 15 cut) cut from silicon wafer were first immersed into Tollens' reagent prepared by 0.04 mol/L AgNO3, 2 % NaOH, 2%% ammonia (NH3 · H2O) and 1.5 % glucose at room temperature.

Silicon pieces were first immersed into an aqueous solution of 5 M hydrofluoric (HF) acid and 0.02 M silver nitrate (AgNO3) for 60 s at room temperature to deposit Ag particles.

When the etching processes were over, the silicon pieces were dipped into an aqueous solution of HNO3 and then rinsed with deionized water to remove any residual Ag. Figure 1 shows the real device image (a) and structure of Si-PIN photoelectronic detector with nanostructured black silicon formed on the front surface (b), respectively.

Surface-coated silicon nitride pieces were joined with a single oxide additive (MgO).

The gas chamber is a sandwich structure of two silicon substrate pieces, each holding a 100 nm thick metal membrane, with a thin silicon nitride spacer in-between.

The mono and bi-layer specimens were grown on 100 nm thick thermal oxide coated silicon wafer pieces via magnetron sputtering using a solid 3.3 cm diameter MoS2 target of 99.95% purity.

Some perfect their costume over multiple years, and some go as far to learn special make-up techniques to fabricate latex and silicon facial pieces, all in the service of fulfilling their visions. .

During fabrication the substrate (platinum evaporated on silicon wafer pieces, see Experimental Section) is subjected to cyclic voltammetry (CV) scans in sulfuric acid with additions of H2PtCl6 and CuSO4.