Sentence examples for significant coating from inspiring English sources

Finite element meshes were created for the most significant coating typologies, starting from SEM acquired microstructures.

It is clear that the NWs grown at the Ar:O2 flow ratio of 100 2 are relatively long and smooth on the surface (Figure 1b), while the lower O2 flow induces a significant coating problem (Figure 1a) and the higher O2 flow suppresses the NW growth (Figure 1c,d).

The failed protective abilities of this modified sol-gel type coating design has been linked with particulate leaching upon prolonged exposure; evidence of this assertion has been established by SEM analyses though AFM evidence also reveals significant coating disbonding without these pigments.

LPS and UCMS exposed mice displayed significant coat state deterioration (UCMS factor H (7) = 37.5, p < 0.0001) and locomotor hyperactivity in a novel arena (UCMS factor F (1,74) = 20.8, p < 0.0001).

Although a number of male chimeras with significant coat colour contribution were generated, a poor rate of germ line transmission was observed even at early passage (data not shown) corresponding to the original findings of Auerbach et. al. [10] with their B6-derived ES cells.

Another explanation would be that in whiter animals ticks are more visible to predators such as birds if compared to animals with dark coat color [ 2]. # Degrees of freedom ns - non-significant Coat thickness showed significant effect on the tick count in both rainy and dry seasons (Table 2).

For treatment of aluminium supporting alumina in the respective baths, no significant conversion coating develops over the immersion period employed and the outer region of the chemically thinned alumina may be considered as aluminium oxyhydroxide.

This was significant for coating concentrations of 0.1  μg ml−1 and above (P<0.05).

Chip off any significant tar coating with a sharp piece of metal--a paint scraper will do, or a knife.

On the other hand, fluoride ions caused significant loss of coating material during coating growth.

Results show that loads and velocities have significant effects on coating frictional properties.