Sentence examples for sidewall for from inspiring English sources

For the perpendicular trench, the thickness of the deposited and implanted layers on the inner sidewall and bottom of the trench were not as small as those of the back and inner sidewall for the parallel trench.

The first set of three digits molded on the tire sidewall (for example 265) is the width of the tire from inner sidewall to outer sidewall (with the tire mounted on the car and inflated to a specified pressure).

The equation was applied to predict the displacements at key points on the sidewalls for caverns of nine projects.

An entirely new annular furnace structure with outer and inner ring sidewalls for supercritical CFB boiler has been put forward by Institute of Engineering Thermophysics IETT), Chinese Academy of Sciences and Dongfang Boiler Group Co. , Ltd

This paper investigates electrodeposition in microcavities with a conducting base and plastic features that provide insulating sidewalls for fabrication of the desired metallic micropart.

A large amount of pyrrolic nitrogen is observed at the CNT tips compared to the amount at the CNT sidewalls for the same ion implantation parameters.

Nearly every weekday morning for much of last year, Mr. Forseth would board a van at the minimum-security prison outside Madison, Wis., and ride to Stoughton Trailers, where he and more than a dozen other inmates earned $14 an hour wiring taillights and building sidewalls for the company's line of semitrailers.

Test specimens from a single length of tubing were examined in a progressive axial crush study, and the controls included removable grooved caps for end constraints, and shallow machined groove patterns on specimen sidewalls for collapse initiators.

With the novel technique, α-Si have demonstrated a great potential for the smoothness of sidewalls for the fabrication of nanostructures with significantly reduced line edge roughness.

Figure 4 SEM observation of NW sidewalls for (a1) a <111>-oriented Si NWs and (b1) a <110>-oriented Ge NWs grown on a Si(111) surface by MBE.

Moreover, the non-conformal deposition limits the next copper growth on one side of the sample (not on the sidewalls) for a bottom-up filling.