Sentence examples for side diameter from inspiring English sources

Single-crystal Si wafers, Si(100), polished on one side (diameter of 6 in)., were supplied by Hitachi, Inc. (Japan), and cut into 2 cm × 2 cm samples.

The right internal iliac artery of the donor uterus in Case 1 was end-to-end anastomosed with that on the recipient side (diameter: 1.0 mm) and the right superficial uterine vein was end-to-end anastomosed with the superficial vesical vein (diameter: 0.9 mm) using interrupted sutures (11-0 nylon; Johnson & Johnson).

Each kidney volume was calculated following the formula: ([Antero-posterior X Bipolar X Side-side diameters]/2) automatically by the machine and expressed in cubic centimeters (cc).

Make sure it is the shape of socket that is roughly one inch long, skinnier on one side (smaller diameter), and fatter on the other (larger diameter).

The smaller thermal strains can be controlled through better size combination between die-side and substrate-side pad diameter.

In addition, besides the geometrical design parameters of the silicon die thickness and the thickness of the stress compliant layer, the reliability impact for the arrangement of die-side and substrate-side pad diameter is investigated by means of the design of experiment (DOE).

Inclusion criteria included main vessel ≥ 2·5 mm and side branch diameter ≥ 2·0 mm by visual estimation.

Both pulleys on the right side have diameter half of that of the drive pulley.

From Met towards the cytoplasmic side, the diameter of the pore decreases and the interior residues become completely hydrophobic.

Pinhole size variation leads to different optical slice sizes described theoretically in transparent media by Eq. (1) [ 22]: (1) z opt = (0.88 λ Raman 1 − 1 − N A 2 ) 2 + (2 P H 2 N A ) 2 With: λ Raman, the emitted Raman wavelength of zirconia at the vibrational frequency of 256 cm−1 (λ Raman = 643 nm), PH, the object-side pinhole diameter [ μm] and NA, the numerical aperture of the objective.

In multi-pin joints, the effect of variation in pitch-to-diameter ratio (P/D) is also important, in addition to side width-to-diameter (S/D) and edge-to-diameter (E/D) ratios.