Sentence examples for side configuration from inspiring English sources

The structure of cavity head has a symmetrical three side configuration for uniform pumping of active medium.

Compared with the side configuration, the magnitude of overpressure generated increases by approximately 80% and 165% for the central and staggered configurations, respectively.

In the present study the performance of photoelectrochemical cell composed of nanostructurized CuxO and TiO2 photoelectrodes short-circuited in side by side configuration in 0.1 M KOH is investigated with the purpose to test the stability of Cu/CuxO photocathode.

All irradiation experiments have been performed in a rear side configuration, i.e., the beam is directed through the fused silica substrate onto the SiO x film (Figure 1b).

Using a rear side configuration, where the beam is guided through the substrate onto the film [8], this transparency is not that critical, i.e., thick layers can be used for confinement.

Viewer provides the information, which is set up in the map toolbar, side configuration panel and base configuration panel, and the information on sensors that move to monitor the area depending on visualization. Figure 11 shows that map objects are expressed by using the GML and processed basically as obstacles.

One of the goals of this code is to reduce the client-side configuration maintenance requirements as much as is possible, without compromising security.

Eventually, we hope to phase out the listing of server hostnames in the client-side configuration files; making preparations now will make the transition easier in the future.

An nMOS connected in the low-side configuration is considered and the failures that result from disturbances superimposed onto the drain-source nominal signal are discussed.

A double flange bearing mechanism in side-by-side configuration isolates the servos from impacts and radial/axial overloads, increasing robustness.

On the basis of these investigations some technology and design solutions are proposed to reduce the susceptibility to electro-magnetic disturbances affecting the drain-source terminals of a power MOS transistor connected in the low-side configuration.