Sentence examples for side coating from inspiring English sources

This paper describes a technique for measuring the thickness of the back side coating of a double-sided coated structure using acoustic resonance.

There are also comments on choosing single versus double side coating or free span versus using a deposition drum and the considerations necessary when depositing multilayer coatings.

Note that the coating on the top surface of the structure does not affect the thickness measurement accuracy of the back side coating.

In order to investigate the effect of the substrate geometry, the residual thermal stress field has also been determined in other configurations such as an asymmetrical arrangement (one side coating) allowing bending and a concentric-cylinder structure.

The resonant frequencies for the examined samples are observed in the frequency range of 46.8 75.6 MHz, and the thickness of the back side coating can be accurately determined from the measured resonant frequency.

The resonant frequency of the transmitted ultrasound occurs when a quarter wavelength corresponds to the thickness of the back side coating, and the reflection coefficient has a minimum value.

When crabs are on second side, coat two pieces of bread with mayonnaise.

The filter was fabricated on 30 mm×19 mm×0.5 mm LaAlO3 wafer that was double side coated with YBCO thin films.

The double side coated samples processed twice, with a break in vacuum to flip the wafer in the chamber.

Ultra-high resolution tungsten tips purchased from Micro Masch with tip radius <1 nm and back side coated with aluminum were used for the AFM experiments.

We divided 96-well streptavidin plates in half: the test side was coated with biotinylated polyclonal goat anti-nitrotyrosine antibody (Abcam 27646, VWR Lutterworth, UK) diluted 1 1,000 in PBS and the control side coated with PBS (75 μL per well).