Sentence examples for si oxide from inspiring English sources

Pai et al. [52] and Lucovsky et al. [53] have shown that the position of the principal absorption band, i.e., the Si-O-Si stretching band of the Si oxide, is sensitive to the O-to-Si ratio.

In the past, researches were focused on luminescent Si-np embedded in Si oxide media.

This size effect was evidenced in free crystalline Si-np surrounded by a thin Si oxide shell [60], which however slightly differ from that generally observed while the crystalline Si-np are embedded in a Si oxide host medium [59, 61].

We have demonstrated the how powerful total photoelectron yield spectroscopy (PYS) is to evaluate the energy distribution of filled defect states for dielectrics such as Si oxide prepared by thermal oxidation and electron beam evaporation.

To fabricate Si-NCs in Si carbide-based dielectric matrix structures, high-temperature (T > 1,100°C) post-deposition annealing of a Si-containing amorphous dielectric film (i.e., Si oxide, Si nitride, and Si carbide) has been commonly used.

Neither surface modification nor removal of surface Si oxide, which formed because of slow oxidation of as-prepared Si nanowires in the air, was necessary before the electrochemical deposition of Au tubes shown in Figure 2. Control experiments were performed, in which surface oxide was removed by HF-treatment (3.4 wt.%, 5 min) before the electrochemical deposition.

A high-performance Si oxide-coated graphite flake (SGF) composite anode for Li-ion batteries (LIBs) is synthesized using a microwave-assisted coating method.

Cell viability on undecanoic acid-terminated porous Si, oxide-terminated porous Si, and oxide-terminated flat (non-porous) Si are monitored by quantification of albumin production over the course of 8 days.

The other two peaks observed at approximately 33° and 62° are related to Al2O3 or Al-Si oxide.

The synthetic procedure has also been applied to prepare ternary Nb-V-Si oxide systems.

Recollecting that the XRD patterns resulted from a combination of microparticles and their surrounding areas, the microparticles are likely to be Al-Si oxide while the areas surrounding the microparticles may be Al2O3, which is in general consistent with the SEM-EDX results discussed above.