Sentence examples for shutdown condition from inspiring English sources

In this paper, the ITER-like conditions are adopted since the associated system for CFETR is missing, such as helium cooling system, plasma shutdown condition, pump behavior, etc.

The paper discusses possibility of heat removal from the RBMK-1500 core at shutdown condition by natural circulation of water (1) and air (2) inside the fuel channels.

In the case of a transient, the passive residual heat removal system (PRHRS) is designed to cool the reactor coolant system (RCS) from a normal operation condition to a hot shutdown condition by a natural circulation, and the shutdown cooling system (SCS) is designed to cool the primary system from a hot shutdown condition to a refueling condition by a forced circulation.

The natural circulation was well established in the primary and passive residual heat removal systems during the transients and was enough to ensure a stable plant shutdown condition after a reactor trip.

The reactor startup is the operational transient in which all the systems of the plant are brought from the cold shutdown condition to the full power mode, close to load-frequency control.

Mr Noda's declaration of a "cold shutdown" condition marked the stabilisation of the plant.

The performances and the stability mechanism under shutdown conditions are discussed.

Different scenarios due to break sizes and plasma shutdown conditions are taken into account.

The results show that stresses in SiC-based cladding are dominated by temperature-dependent irradiation-induced swelling, with the largest stresses occurring during the cold shutdown conditions.

Industrial start-up, operation, and shutdown conditions of a prereformer catalyst can vary, and the present work has the objective to study the consequence of start-up and shutdown conditions on the sulfur chemisorbed on the nickel surfaces in the catalytic bed.

Electrochemical noise measurements (ENM), linear polarization resistance (LPR), electrochemical impedance spectroscopy (EIS) and scanning reference electrode technique (SRET) were used in this investigation under open circuit potential (OCP) in the simulated shutdown conditions of the chlorate production industry (decay).