The adaptive scheme shows the worst performance, and the fixed scheme performs slightly better than QDRA.
The EM-based algorithm shows the worst performance in CFO estimation among all, but it performs better than JML-CFE in CIR estimation.
Immediate error feedback recommended by the International Organization for Standardization (ISO) showed the worst performance in these studies.
The results of our experiments indicated that the hybrid ensemble shows the worst performance while the MLE ensemble provides superior performance in most cases.
Samples immersed in MgCl2 solutions had the lowest corrosion rate, while samples immersed in the NaCl solutions showed the worst performance.
Pentium D shows the worst performance in many aspects due to its technology-remap of Pentium 4 without taking the advantage of on-chip communication.
The PmTC with flat absorber shows the worst performance showing more than 25% penalization in terms of maximum drag and moment values in comparison with the other three collectors.
The proposed micromixer shows excellent mixing performance in the low Reynolds number range in which diffusion dominates the mixing, but shows the worst performance for Reynolds numbers greater than 50 among the four micromixers tested in this work.
Compressive tests from room temperature to 1500 °C showed that the Ir 10Nb 5Si alloy, with a predominant fcc microstructure, always had the highest deformation hardening rate, strength, and ductility; on the other hand, the Ir 25Nb 5Si alloy showed the worst performance.
Instead, the fixed bed of Egg-Shell caloneshowedne showed the worst performance: CH4 conversion and H2 selectivity were lower of about 15%and10%0%, respectively, and decreasing with the increase of WHSV; on the contrary, the CO selectivity remained practically the same, only a slightly decrease being observed.
The SA algorithm showed the worst performance.
