Sentence examples for shore hardness from inspiring English sources

Examination of PIB PTMO TPUs with varying hard: soft compositions (20 80, 35:65 and 40 60 wt:wt) and Shore hardness (60 A, 80 A and 95 A) indicated that substituting 10 30 wt% of PIB diol with PTMO diol is sufficient to reach mechanical properties similar to Pellethanes.

The highest shore hardness (69.7 HD) was recorded at a temperature of 25 °C, while the lowest shore hardness (31.3 HD) was recorded at 200 °C.

The shore hardness, tensile strength and tear strength of normal and aged NBR samples were measured.

As the ageing time and temperature increased, the friction coefficient and the shore hardness also increased.

The shore hardness of the MWCNT/NG/EP composite decreased with increasing temperature.

Especially, UCS, ITS, Shore hardness (SH) and the interactions between them were found to be very effective on DRI values.

Mechanical properties included uniaxial compressive strength, tensile strength and modulus of elasticity, while index properties consist of Shore scleroscope hardness, Schmidt hammer hardness, cone indenter hardness, Bohme surface abrasion, Los Angeles abrasion with 100 and 500 revolutions.

Four polyurethane elastomers with Shore A hardness values of 55 85 were tested.

Vulcanized polyurethane rubber with a shore A hardness of 60 was used for the pad.

The results showed that increasing the amount of wood waste reduced density and Shore C hardness.

Here, the tyre temperature is measured during the measurement run, and subsequently calculated to the in-situ shore A hardness.