Your English writing platform
Discover LudwigExact(3)
PDMS (Sylgard-184, Dow Corning) was mixed at a curing agent to elastomer ratio of 1 10, de-gassed, cast in a 10 cm Petri dish (no patterning, for adhesion assays) or on a nickel shim with nano-fabricated obstacles of 1.05 or 1.5 μm (Kelvin Nanotechnology, Glasgow, UK) and cured for 2 h at 60°C.
Pinch the shim with one hand.
You can also try making a shim with an aluminum can, this will be free.
Similar(57)
The HiPIMS-CrNx films were deposited on polished AISI 52100 (100Cr6) steel shims with a hardness of 60 ± 2 HRC using a Cemecon CC800®/9 HiPIMS device.
I looked at the instructions at Homestore.com and knew I was licked when it told me to "Set a pair of shims with tapers opposing between the frame and stud at each hinge location and if there are only two hinges, in the middle".
RF shimming with the parallel-transmit coil produced significant advantages the transmit field was 38% more uniform than a traditional circularly polarized mode and 54% more power-efficient, demonstrating that parallel-transmit coils should be used for monkey imaging at ultrahigh field strengths.
Automatic shimming with manual fine tuning of the B0 magnetic field was used as well as iterative semi-automatic optimization of the transmitter voltage.
Localized shimming with FASTMAP method was performed on a 2.5 mm voxel to obtain line widths of <20 Hz.
Don't forget screws to screw the cabinets to the walls and shims with which to level the cabinets.
This shim set, with its supporting structure, occupies only 2 mm of the available 5 mm gap in a small 1.6 T magnet.
Teflon shim stocks with different thickness were placed between the plates as a spacer as well as sealing gasket; no O-ring seal was used.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com