Sentence examples for shifting to construct a from inspiring English sources

The new element has three salient features in its formulation: (i) the use of B-spline shape functions for the interpolations of both in-plane and out-of-plane displacements of a general thin shell element; (ii) the use of "displacement constraints" and "parameters shifting" to construct a finite element model; (iii) that a proposed modified version of the Koiter's thin shell theory is employed.

We reduced the time series to the months around the time transition (March and April for the spring shift and September to November for the autumn shift) to construct a prediction model in order to assess the potentially higher rates caused by the time shifts.

Then, we discrete the continuous dilation parameter and shift parameter to construct a set of orthonormal linear canonical wavelets.

The obtained values of phase shift are used to construct a volume (three-dimensional) image of a cell [ 6].

Yield stress data for the CS-PEA materials could be shifted with respect to strain rate to construct a master curve, indicating that yield properties at these strain rates were determined by the matrix response rather than debonding as observed in other starch-filled materials.

The toroidal pulse is shifted in both time and frequency to construct a rectangular Weyl-Heisenberg system.

With the aid of the two aging shift functions, it becomes possible to construct a single dynamic modulus master curve after taking into account the effects of temperature, long-term aging, and non-uniform aging with pavement depth below the surface.

Two basic questions are (1) given an IFS, how to construct a shift invariant section, and (2) when is a fractal transformation a homeomorphism.

Sun and Su [60] proposed the hypothesis of shift to construct two-dimensional PSD using one-dimensional PSD.

Nevertheless, there is still the possibility of decomposing the window into its upper and lower parts, as shown in Figure 5, and using these functions to construct a Nyquist filter by shifting them to the right by a distance marked.

8 Both the ZS and BIRD methods are typically used to construct a pure shift interferogram, which can be Fourier transformed to yield a decoupled spectrum from a series of short chunks of data acquisition of duration 1/SW1; 3a real-time windowed acquisition can sometimes be used to speed up experiments, but at some cost to spectral quality and resolution.