"shield plate" is a correct and usable phrase in written English.
You can use it when referring to a piece of metal designed to provide a protective barrier or cover. For example, "The tank was shielded by a thick steel shield plate."
Based on a thorough analysis of the conventional sensor with needle electrodes, the C.E.T. sensor effectively overcame the fault (wall-approach-effect) of the conventional sensor with a special structure formed by several cylindrical electrodes and a shield plate on the top.
Adjustment of the depth-dose profile was achieved by placing 2 mm of PMMA in the beam just above the shield plate openings and resulted in 100% nominal dose at the proximal and 75% at the distal border of the hippocampus (at +5 mm depth in the mouse), respectively.
The N2 gas was channeled continuously through the thermal shield plate, resulting in a temperature variation of ±0.3°C for thirty minutes on the top surface of the plate.
24 h before injury, rats were anesthetized by i.p. injection of a ketamine/xylazine cocktail (80 mg/kg ketamine and 10 mg/kg xylazine) and then installed under a 4 cm-thick lead shield plate with their right hind limb facing a hole allowing radiation to pass for local irradiation.
A 3D-printed 4-mm thick thermal shield plate, having a meandering air path, was additionally placed between the sample and the covering plate of the B p dewar, in order to keep the tissue temperature constant against the relatively cold surface of the dewar.
The IWS is composed of shield plates, upper/lower brackets and bolt/nut/washers.
Concerning the removal of macroparticles, methods using magnetic filters, magnetic forces, and shield plates are discussed.
The number of the heat shield plates and size mainly affected the temperature gradient of the salt and argon gas under the cover.
More than 3 heat shield plates had to be placed in the cooling zone and their diameters should be extended over 410 mm that is over 0.95 of the cell diameter.
We demonstrate that the emissivity of different regions of a thermal shield assembly can be determined in a single measurement cycle, providing further emissivity data on the insulating spacer used to separate shield plates as well as emissivity data on a silver coating repair method.
Installation of the 32X also requires the insertion of two included electromagnetic shield plates into the Genesis' cartridge slot.
