Sentence examples for shield layer from inspiring English sources

In the trench between CG stacks, gate stack, poly-Si bodies, back-side oxide (BOX) and shield layer are formed.

This was because a "shield" layer of deposited particles developed more rapidly under infiltration compared to "no-infiltration" conditions.

The 3-D stacked NAND flash memory structure without shield layer showed significant cross-talk between adjacent bodies.

In this study, we investigated the use of a conductive shield layer (CSL) as a means of reducing the artifact noise recorded by nerve cuff electrodes.

The first shield layer were plates of tungsten carbide (WC), ceramic balls Al2O3 (aluminum oxide 92) or steel balls (100Cr6 steel) embedded in a polymer matrix.

This external solar shield layer would absorb the solar radiation incident on the outer walls of the building and get heated inducing a convective airflow in the gap between the layer and the building.

By adopting shield layers in the trenches, the cross-talks were completely removed.

The designed HTS cable has a copper former and copper shield layers in parallel with the HTS conducting layers and HTS shield layers, respectively, to control the temperature rises in the cable core at fault-current conditions.

The HTS cable has a copper former and copper shield layers in parallel with the HTS conductor layers and HTS shield layers, respectively, to control the temperature rises in the HTS cable at a fault accident.

However, the number of tungsten shield layers plays a trivial role on the temperature gradient between the ALN powder sources and the crucible top.

The optimized parameters indicated that the shield layers (where the shield consists of re-deposited eroded sediment) of the wider flumes (1 and 2) developed within 5 10 min from the start of the experiment, whereas in the narrower flumes (3 and 4) they never fully developed.