Sentence examples for shear axis from inspiring English sources

The faults first propagate in-plane, but then rapidly change direction to make a larger angle with the shear axis.

In addition, the ulnar directed forces along the shear axis defined in this study were greater for all three JIA children compared to values for the healthy child.

The tests have been performed on specimens of rock-like material or hard rock, respectively, incorporating idealized non-persistent joints, made up of a number of short cracks in an en-échelon arrangement along the central shear axis.

The main deformation mechanisms which have been observed are: (i) kinking of the lamellae which lie along the principal compressive axis; (ii) nanocracks across the lamellae lying along the principal tensile axis; (iii) fragmentations of the lamellae which are parallel to the shear axis; (iv) fragmentations of the lamellae which are perpendicular to the shear axis.

Specimens were then subjected to oscillatory strain (7%, i.e. small but in the non-linear viscoelastic regime) with the cylinder axis parallel or perpendicular to the shear axis at room temperature (where PS is glassy).

Shear deformation, rotary inertia and warping are included in the analysis of the beam, and due allowance is made for offsets between the plate attachment lines and the shear axis of the beam.

The rotary intertia effect is taken into account by determining the lateral rotations of cross-sections by the flexural slopes of the shear centre axis.

The results currently available, obtained from Generalised Beam Theory and Ansys shell finite element analyses, concern continuous beams and simple frames subjected to various transverse loadings applied at/along the shear centre axis and causing non-uniform bending.

We developed an IGA beam loaded in such a manner that the resultant force passes through the longitudinal shear center axis, i.e. no torsion will occur.

The initial cohesion (C0) and the failure cohesion (Cf) are determined from the intersection of the yield and failure surface with the shear stress axis, respectively.

spectroscopy with the polarized radiation confirmed the presence of single crystal-like orientation in the film specimen with the crystallographic c-axis preferentially oriented parallel to the shear direction, b-axis to the transverse direction, and a-axis normal to the film surface.