Sentence examples for sharp voltage from inspiring English sources

Sharp voltage drops are located at the position of topographic steps and along the dotted line which we explain as a domain boundary in the TI film.

In striking contrast, the bare Li-metal anode exhibited sharp voltage fluctuations from the first few cycles, which is attributed to an internal short circuit or electrolyte depletion from repeated Li deposition and dissolution.

Figure 3(a) shows charge-discharge curves of the cell at a constant current density of 0.1C at 30 °C (C-rate is defined as the current to discharge the theoretical capacity in 1 hour: 1C) The Na2V3O7 electrode exhibited a reversible capacity of about 90 mAh g−1, and a sharp voltage increase followed when a voltage cutoff condition of 3.5 V vs. Li+/Li was reached.

Although lithium-rich layered composite cathode materials can meet the requirements of high discharge capacities and energy densities of lithium-ion batteries (LIBs), the drawbacks of encountering structural reconstruction, sharp voltage decay during cycling as well as low packing density still exist, which retard their further commercial development.

When the system is operated in discharges at 0.9 torr argon gas pressure and initial charging voltage of 8.4 kV, the focusing/pinching indications are genuinely observed as the appearance of a sharp voltage spike/intense current drop on the electrical discharge traces.

Although the DMFC stack undergoes a sharp voltage drop and a significant performance decrease at the initial stage of the frozen condition, the self-heating DMFC are successfully operated at −5 and −10 °C in both constant current or constant voltage modes.

However, at Vm ranging from +10 to +80 mV, block events and smaller substates disappeared, suggesting sharp voltage-dependence, while the substate with the highest level of conductance remained with a significant probability.

In the latter case, sharper voltage peaks, as compared with Fe-rich microwire, reflect higher DW velocity which should be attributed to lower magnetostriction constant of the Co-rich microwire.

Comparatively, peptide blockers [18] and even ryanodol, a neutral ryanoid [36], have sharper voltage-dependence.

Without nanoparticle seeding, there is a sharp decrease in voltage across the gap at the breakdown voltage.

The cells tested at lower temperatures (£200 °C), however, exhibited a sharp drop in voltage at the end of discharge due to the diffusion limitation, possibly caused by the limited ionic conductivity of catholyte or the poor wettability of sodium on the β″-Al2O3 solid electrolyte (BASE).