Sentence examples for sharp corner with from inspiring English sources

Because the PC waveguide can guide light around a sharp corner with a high efficiency, the radiation can be directed to any area in a PC by using our design.

Respondent Scott Siegel said that taking a sharp corner with front-wheel drive involves letting off the acceleration in order to keep the car under control, but rear-wheel drive cars don't have the same limitation.

The characteristic equations are explicitly given for determining the stress singularities in the vicinity of the interface corner of two intersecting bodies of revolution having a sharp corner with free boundary conditions along the corner.

Choose a sharp corner with a short straight before it.

He stood up, weighing it, tapping its sharp corners with the pads of his fingers.

In order to improve the coupling between these two nanorods, we introduce a sharp corner part with gap widths g from the other ends of the nanorods.

We fabricated modules with two different classes of shapes: (i) square and clover-leaf cross-sections, to demonstrate that our technique can generate modules with sharp corners and with various shapes; and (ii) circular cross-sections to allow easy comparison of our technique to the original process of McGuigan and Sefton, which also produced cylindrical modules [23], [24].

Compared with the structure with a sharp corner part, the nETR spectrum for the structure with a cylinder corner part has a lower maximum enhancement of about 76,200, while the resonance wavelength is almost unchanged.

It is concluded that geometry B (triangle with round corner) is superior to the other two (round and triangle with sharp corner) due to its excellent thermal hydraulic characteristics.

Figure 5a displays the nETR spectra in the V-shaped structures shown in Figure 3a with a sharp corner part, θ1 = θ2 = 60°, and different gap widths g, compared with the case of single nanorod.

Specifically, valves with a sharp corner feature (v-shaped) actuated at lower pressures (1.5 psi) compared to straight-shaped valves (3 psi).