Sentence examples for shaft encoder from inspiring English sources

Therefore, the 1024 cycles per revolution (CPR) optical shaft encoder from US Digital became our angle sensor.

Therefore, we turned to the MAE department, where we were able to borrow a 1024CPR (cycles per revolution) optical shaft encoder from MAE478's feedback lab.

In this article a new type of absolute shaft encoder is presented for the measurement of fuel level in a tank.

Here, the mechanical displacement is detected by an absolute shaft encoder and each position is represented by variant intensity of lights.

This paper investigates a practical impedance control system design that utilizes a DC servomotor actuator and a shaft encoder feedback sensor.

An accelerometer (with sensitivity of 100 mV/g and frequency range 0 10 kHz) and a shaft encoder are used for capturing the vibration signals and rotating speed signals simultaneously.

This code was used to drive the motor with manual rotation of the encoder shaft.

Finally, a pin was attached to the shaft of the encoder, with plastic tie-wraps, and connected to the pendulum's bracket.

The height of the encoder's shaft was aligned with the pivot, effectively creating an imaginary line from the pivot to the encoder's shaft.

Rather than using the encoder's shaft as the pivot, we decided to use an approach that would put the least amount of stress on the delicate piece of equipment.

The bracket had a 0.096" hole drilled above the pivot such that the pin would fit tightly, without slipping; therefore, when the pendulum moved, the encoder's shaft rotated (See Figure 3, Image 3 and Image 4).