Sentence examples for shaft diameter from inspiring English sources

If the shaft and the key are of the same material, a key with a width and depth equal to one fourth of the shaft diameter will have the same torque capacity as the solid shaft if its length is 1.57 times the shaft diameter.

Equations for mechanical design are given, including determination of shaft diameter and critical speed.

The rotor shaft diameter has been chosen as a design parameter.

The cephalic lag screws have a shaft diameter of 7.5 mm and an outer thread diameter of 9.7 mm.

The burdock hook (span ~250 μm, shaft diameter ~200 μm) is desiccated when mature, without any secretory organs.

The chapter discusses the concept of rotor stiffness that is shown to be proportional to shaft diameter and bearing span.

Increasing contamination, industry trends for high barrier fluid pressures, coupled with larger shaft diameters and high shaft speeds only serve to exacerbate these issues.

The results also showed that designers should pay attention to separation frequencies and decreasing pre-stresses using 100 500 mm of shaft diameters during interference fitting.

As for the control factor, the shrink fitting condition of the rotor shaft is allocated to each level, the signal factor is three types of shaft diameters φ12(mm), φ12.5 mm), φ15 mm) with different outer diameters, and the error factor is 30 and 60 μm.

In this study, the stress distribution in interference fitted shaft hub assembly was investigated in relation to the ratio of contact length-shaft diameter using the finite element method.

The distal extremity is medio-laterally expanded relative to the mid-shaft diameter and possessing a medial and cranial expansion of the epiphysis.