Sentence examples for setup of the test from inspiring English sources

Figure 7 Experiment setup of the test platform.

Open image in new window Fig. 5 Setup of the test specimens.

In July 2014 23 teachers received a letter with information about the setup of the test phase.

It therefore follows that the amount of development required would depend on the novelty of the testing procedure, both on a general level (ie, in the literature) and within the laboratory setup of the test.

For the purpose of the scenario, the application of video streaming was demonstrated, which requires at least several hundred kbps, which are much higher than data rate provided by TETRA release 1, whose data rate is in the order of several tens of kbps. Figure 4 shows the setup of the test-bed, where video streaming from a video-surveillance camera was used to validate the test-bed.

Experimental test setup of the tested beam-column is shown below.

The details of the overall system which includes the setup of the testing by using a PXI (PCI extensions for instrumentation) system with Data Acquisition (DAQ) and Source Measure Units (SMUs) module, and the LabVIEW based automatic testing program has been introduced in this paper.

The setup of the testing machine, jig assembly, and synthetic bone was schematically shown in Figure 2. In the literature, Chapman et al. [ 4] propose an analytical formula to predict the pullout strength of a cancellous screw within synthetic bone.

The paper reports in detail the setup arrangement of the test campaign in order to verify significant working capability of the IVVS actuating components and the results are shown in terms of functional performances and parameters.

Fig. 3 Experimental setup of the DCB tests with falling-wedge impact tests Fig. 4 During the test, the wedges descend and pass through the pins, which are inserted in fixed aluminum blocks at the end of the DCB specimen.

Fig. 7 Experimental setup of the localization test bed.