Sentence examples for setup hardware from inspiring English sources

The setup (hardware tester and MATLAB GUI) allows measurements of all six bondwires in one IC package.

Table 1 CMQ testbed setup   Hardware Software 2 Server HP DL 580 G5 4 quad core Intel Xeon E5450 @ 3GHz 32GB RAM Citrix XEN 5.6 2 Linux VMS on separate XEN Server ARCH Linux 2011.8, Haskell GHC 7.0.4 2 vCPUs @ 2GHz 4GB RAM 2 Fabric extenders Cisco Nexus 2248TP-E 1 1 Core switch Cisco Nexus 7000 NXOS 5.1(2) Figure 4 Logical diagram of the testbed configuration.

In a real-hardware setup, hardware under-equipping or over-equipping occurs frequently, resulting in either insufficient performance or wasted resources.

Setup hardware.

PowerCloud Systems has experience building those kinds of solutions, and saw an opportunity to bring the same level of control to the consumer sphere, via a combination of easy-to-setup hardware, and an easy to use cloud-based dashboard.

With EC2 there would no longer be a requirement to source and setup physical hardware and the virtual server instances are charged back to the user based on the CPU, storage and bandwidth usage.

The acquisition time per pixel was 200 ms. After submission of this work, we improved our setup regarding hardware and software, which allows measurements as fast as 4 minutes, with pixel dwell times of 20 ms without lowering the signal to noise ratio.

Measured results on a real experimental setup with hardware-in-the-loop are shown.

Regarding image fusion, artifact size did not affect the coregistration between MRI and PET in our trimodality setup, since hardware-based coregistration is independent of image information and visual corrections, which if necessary are performed using bony structures, not affected by focal signal voids.

This is compared to techniques such as fringe projection, moiré interferometry, or low coherence interferometry, just to mention a few, where the setups and hardware employed may be more complicated to implement for this particular application.

The behavior of a database system can be described by the following formula [38]: begin{aligned} f configuration times workload rightarrow performance end{aligned}Here, the system configuration consists of a hardware setup (characteristics of the used hardware), software setup (boot-time parameters), database physical design and so on [38].