Sentence examples for settling time for from inspiring English sources

Consequently, settling time for the capacitive DAC would be a dominant limiting factor for the ADC operating speed.

It is found that inclusion of transverse shear rigidity, as a design parameter in damping augmentation studies, reduces settling time for predetermined maximum peak displacements.

For the sake of suppressing the axial or transverse vibration of the beam system, the required electric field and settling time for the LE case are greater than that for the IDE or CLIDE case.

The overspeed, overpower, and settling time for pitch responses to step wind speeds are investigated, and their values for the target 2 MW wind turbine and the 3.5 kW simulator are compared quantitatively.

The results show the importance of prefilter moment values for tracking performance and confirm that the proposed method can achieve significant reductions in both peak and RMS tracking error, as well as settling time, for complex motion patterns.

The paper deals with the development of a new robust PID controller design method that guarantees designer-specified maximum overshoot and settling time for non-minimum phase processes with unstable zero.

In our research we target the settling times for the beam steering to be on the order of a few microseconds, consistent with the timescales over which the atomic states remain quantum mechanically coherent.

Finally, we have showed that if a ramping time of a few seconds is introduced, the allowed delays can be longer, but from a power system's perspective an immediate response results in better frequency profiles (smaller deviations and settling times for the power oscillations).

For spherical particles of unit density, settling times (for a 3-m fall) for specific diameters are 10 s for 100 μm, 4 min for 20 μm, 17 min for 10 μm, and 62 min for 5 μm; particles with a diameter <3 μm essentially do not settle.

It is noted that the settling time functional for fixed-time synchronization is independent on initial conditions.

Neither the solvent to feed ratio, nor the settling time allowed for phase separation is near that of the laboratory precipitation procedure.